790922
Electronic equipment 578D (remote installation)
The board 780D can be used with the gearmotors 746 E R e 844 E R.
The board 578D it can be installed remotely to control sliding gates or for industrial doors; it can also be inserted in a specific enclosure equipped with a disconnecting switch, remote control switches, control keyboard and activation key.
THÔNG SỐ KỸ THUẬT
| -- |
780D (integrata nel motoriduttore)
578D (per applicazione remota)
|
| Power supply type |
Separated (faston connection on the printed circuit)
Integrated
|
| Power Supply Voltage | 230V~ (+6%-10%) 50(60) Hz |
| Max Power | 10 W |
| Max. engine power | 1,000 W |
| Max accessories load | 0.5 A |
| Programming mode | 3 keys (+, -, F) and display, “basic“ and “advanced“ mode |
| Status signalling | Via display |
| Operating logic | Automatic, ”Stepped” automatic, Semi-automatic, ”Stepped” semi-automatic, Safety, Semi-automatic B, Dead man C, Mixed logic B/C |
| Programmable functions | Operating logic, Pause time, Thrust power, Opening / closing direction, Torque at initial thrust, Braking, Failsafe, Pre-flashing, LED, Timed output, Op. and cl. electric lock, Op. and cl. safety devices logic, Encoder, Anti-crushing sensitivity, Decelerations, Partial opening time, Work time, Service request, Cycle counter |
| Work time | Programmable (from 0 to 4 min) |
| Pause time | Programmable (from 0 to 4 min) |
| Engine power adjustment | Adjustable on 50 levels |
| Terminal boards input |
Open, Partial open, Opening safety devices, Closing safety devices, Stop, Edge, Power supply + Earth, Op. and Cl. limit switch, engine capacitor
Open, Partial open, Opening safety devices, Closing safety devices, Stop, Edge, Power supply + earth, Op. and Cl. limit switch, Encoder
|
| Terminal boards output | Flashing light, Engine, 24V __logo__DC__ accessories power supply, 24V __logo__DC__ LED, Timedoutput, Electric lock control, Traffic light control, Failsafe |
| Rapid connector | 5-pin board insertion, MINIDEC, Decoder or RP receivers |
| Protection Fuses | 2 |
| Operating ambient temperature | -20 °C ÷ +55 °C |
| Enclosures compatibility |
-
mod. E - L - LM
|
MẪU
|
Model |
Item code |
|---|---|
| 578 D electronic control board (remote installation) | 790922 |
| Control board 780 D (incorporated in automation) | 7909212 |
HƯỚNG DẪN LẮP ĐẶT
PHỤ KIỆN VÀ LINH KIỆN
Accessories
Enclosure mod. L for electronic control boards
Item code: 720118
Enclosure mod. E for electronic control boards
Item code: 720119
Enclosure mod. LM for electronic control boards
Item code: 720309
Release lock with key
Item code: 712805
Spares
If you are interested in a spare part, go to the spare parts area. ATTENTION: (The area will not be
Item code: